Next, load the nanoCLR.hex file from the extracted package folder by clicking the "Browse" button. Make sure you tick the "Run after programming" and "Skip flash erase before programming" check boxes and hit "Start Program..." button. After the upload completes, the MCU is reset and the nanoCLR image will run. This time and if all goes as expected, there will be no LED blinking. You can check if the board is properly running .NET nanoFramework by looking into the Device Explorer window in VS. You may have to click the "Rescan nanoDevices" button (the magnifying glass icon).
Icon Cube 4 Nano Driver Zip
Load the nnnn.dfu file by clicking the "Browse" button. Make sure you tick the "Run after programming" check box and hit "Start Program..." button. After the upload completes, the MCU is reset and the nanoCLR image runs.You can check if the board is properly running .NET nanoFramework by looking into the Device Explorer window in VS. You may have to click the "Rescan nanoDevices" button (the magnifying glass icon). 2ff7e9595c
コメント